Product
Contact Us
PCENERSYS (SHENZHEN) Co.,Ltd.
Building C, FuXinLin lndustry Park, Hangcheng lndustrial Zone, Taoyuan Community, XiXiang Street, Bao'An District, Shenzhen, Guangdong, China
E-mail:Sales@pcenersys.com
Tel: 0086-755-36610076
Fax: 0086-755-36610073
Hybrid Inverter Solar Power System 8KW 10KW 12KW Three Phase ESS Outdoor Use MPPT Hybrid Solar Inverter On/Off Grid
Category Solar Inverter
Product serial number 000
-
产品描述
-
Technical parameter
-
Three phase hybrid inverter
● Compatible with lead-acid and lithium-ionbatteries;
● Battery reverse connection protection, anti-power control function;
● Support diesel generator input source;
● Input power source priority can be set by users;
● lP65 protection, low noise < 35dB;
● Support full power discharge, automatic management
of batterycharge and discharge;
Flexible configuration
lt supports simultaneous access of photovoltaic, diesel generator, battery and load, with strong adaptability and black start; various working modes can be set flexibly;
Safe and reliable
● Wall-mounted design saves space
● Natural cooling, low noise
● Multifunctional protection; IP65 protection grade, reverse battery protection
● Compatible with anti-backflow function, full power discharge
Product size detail display
Simple - efficient - safe - reliable
Project Name Describe 1 LCD screen Display inverter information. 2 Indicator light Green light on: The inverter is in grid-connected mode. Off: The inverter is not in grid-connected mode 3 Green light on: The inverter is in off-grid mode. Off: The inverter is not in fff-grid mode 4 Yellow light on: The inverter is in a warning state. Off: The inverter has no inverter warning 5 Red light on: Inverter is in fault state. Off: The inverter has no fault 6 Function button Esc: Return from the current interface or correspondence. 7 Up: Move the cursor up or increase the value. 8 Down: Move the cursor down or decrease the value. 9 Enter: Confirm selection. Three phase ESS hybrid inverter
1.Compatible with lead-acid and lithium-ion batteries;
2.Support diesel generator input source;
3.IP65 protection, low noise < 35dB;
4.Battery reverse connection protection,anti-power control function
5.Input power source priority can be set by users;
6.Support full power discharge,automatic management of battery charge and discharge;
7. It is more economical to support multiple operation modes;
8. It can be used as a UPS for important loads during power outages;
-
R8KH3 R10KH3 R12KH3 Input (PV) Max. power(kW) 10.4 13 15.6 Max. DC voltage(V) 1000 MPPT voltage range(V) 180-850 Max.input current of single MPPT(A) 12.5 MPPT tracker/strings 2/1 AC output Rated output power(kVA) 8.8 11 13.2 Max. output current(A) 12.7 15.9 19.1 Grid Voltage/Range(V) 400/360~440 Frequency (Hz) 50/60 Power Factor 0.8lagging-0.8leading THDi <3% AC output topology 3W+N+PE Battery Battery voltage range(V) 125-600 Max. charging voltage(V) 600 Full BatteryVoltage(V) 210 270 250 Battery type Lithium/Lead-acid Max.Charge/Discharge Current(A) 40 40 50 Communication interface CAN/RS485 EPS output Rated power (kVA) 8.8 11 13.2 Rated output voltage(V) 400 Rated output current(A) 12.7 15.9 19.1 Rated frequency (Hz) 50/60 Automatic switching time (ms) <20 THDu <2% Overload capacity 110%, 30S/120%, 10S/150%,0.025 General data Battery Charge/Discharge Efficiency 96.6% 96.7% 96.8% DC Max. Efficiency 97.9% 98.2% 98.2% Europe Efficiency 97.2% 97.5% 97.5% MPPT Efficiency 99.5% 99.5% 99.5% Ingress protection IP65 Noise emission (dB) <35 Operation temperature - 25℃~ 60℃ Cooling Natural Relative humidity 0~95%(non-condensing) Altitude 2,000m(>2,000 Derating) Dimensions W*D*H (mm) 530*200*600 Weight (kg) 29 Isolation transformer No Self-consumption(W) <3 Display and communication Display LCD Interface:RS485/WIFI/4GCAN/DRM Yes/Opt/Opt/Yes/Yes Certification CE,TUV
SAUNDERS
WRITE A MESSAGE TO US
Copyright © 2022-2026 PCENERSYS (SHENZHEN) Co.,Ltd. Power by 300.cn 粤ICP备2022001237号
Powered by:www.300.cn SEO